If your patio cover has a stain, you can remove it with a soft cloth. Apply dish detergent to the cloth and rub it lightly on the stained area.
You can also use a pressure washer and a mild detergent to remove the stubborn stains.
Do this before you clean your Vinyl Patio covers
Before you begin cleaning, remove hanging plants and furniture. If the spot is stubborn, use a stronger cleaner like bleach. Make sure to rinse your patio cover thoroughly after washing it.
Power wash using low flow setting
If you have a power washer, wash your cover on a low flow setting so that water doesn’t break the seams. You can also use a soft-bristled brush to remove loose dirt and debris from the surface.
You should also avoid using a power washer too close to the covers. Using a garden hose can also make cleaning easier. However, be sure to use the right product for the job.
Simple ways to clean a vinyl patio cover
If you don’t have a strong brush, you can also try a large pencil eraser to clean tough stains. A soft-bristled brush is best for removing dirt, but you should be careful not to scratch the material.
1). Use Baking soda solution
Baking soda can also be used as a scouring agent to remove dirt. When cleaning vinyl outdoor furniture, you should rinse it thoroughly with lukewarm water or a mild detergent solution. If the cover is still wet after a thorough scrubbing, it will deteriorate and grow mold.
2). Clean with Hydrogen peroxide
Blood stains are common on patio covers. A solution of 1/4 cup hydrogen peroxide and 1/2 teaspoon Dawn dish soap is an effective solution. You should test the mixture in a small area before using it on the whole area.
This solution is usually effective enough and should work for most blood stains.
Afterwards, just blot the area with a clean damp cloth. If you can’t remove the stains with the above methods, consider purchasing a new set.
3). Use a soft-bristled brush
If you don’t plan to use the patio furniture cover during the winter months, you can clean it manually with a soft-bristled brush. You can also spray the cover with fabric guard to protect it from water damage.
Generally, a solution of half a gallon of water and a tablespoon of vinegar will do.
After the bleach solution has dried, you can gently wipe down the rest of the furniture with a wet cloth and allow it to air dry.
4). Washing soda solution
This is a solution of 1 part baking soda and 3 parts water. A mixing of baking soda and one part ammonia bleach will produce an effective cleaning agent. You can mix it with water and soap to remove stubborn stains.
Besides, it’s also effective against fungus. The acidity of the vinegar will kill any mold on your patio cover and will not harm the protective coating.
Why should you clean patio covers?
The main reason why you should clean your vinyl patio cover is to protect it from the sun’s rays. It’s also important to avoid corrosive cleaners.
They will strip UV protection and cause the fabric to fade. If you want to clean your patio furniture, you should use a cleaning solution that won’t scrape the material. Depending on the material of your furniture, you can clean the entire cover with a soft cloth.
How often to clean patio covers?
If you want to keep your vinyl patio cover in good shape, you can clean it regularly. You can use mild soapy water and distilled white vinegar to clean the patio cover.
Then, you can use a squeegee to remove water spots. Repeat the process every few days to maintain your cover. Doing this will ensure that your vinyl furniture stays in good shape and prevents fading.
Conclusion
If you’re using a vinyl cover for your patio, you should avoid putting anything on top of it.
Objects placed on top of the cover can leave marks or trap moisture. Then, you should take care of your vinyl patio cover by washing it periodically.
It’s not necessary to buy expensive products. Most cleaning supplies can be found in your kitchen. Just make sure to keep your patio covers free from dirt. It’s important to keep them clean and safe from mold and mildew.
