Old Arctic Spa Models (Repair and Replacement Guide)

arctic spa

Are you looking to replace an older Arctic spa heater? If so, you’ve come to the right place.

This article covers many topics related to older Arctic spa models, including how to repair an HL error message, how to replace an Onzen(tm) Salt Water system, and even the cost of replacement heaters.

Whether you’re looking for an outdoor spa for your family or an indoor one for yourself, you’ve come to the right place.

HL error message on older arctic spa models

If you see a HL error message on an older Arctic spa, you need to call in a service technician immediately.

These messages indicate a serious problem. In order to resolve the issue, you must power up the spa in Test Mode. If you don’t do so, your spa will shut down. This error message means that the spa is overheating or that the water temperature has reached 118 degrees Fahrenheit.

The most common cause for this error message is a faulty heater. The spa’s temperature should be around 85 degrees Fahrenheit, but if it’s not, it’s best to contact the manufacturer. If you don’t know how to fix it yourself, you can ask a supplier or call a good hot tub service engineer for assistance. The supplier can often perform a simple repair.

Another reason for this error message is a malfunctioning GFCI. The GFCI trip feature in older Arctic spa models may have been disabled. If this is the case, the system will display the StU message and attempt to shut down, which will trigger the HOt flag. If you don’t want to replace the entire system, you can also try replacing the faulty temperature probe. Once you have found the faulty temperature probe, you can then look for other possible causes for the error.

The HL error message on older Arctic spa models means that the heater is malfunctioning. The main circulation pump in a hot tub is responsible for moving water in and out of the spa. To determine if the problem is the pump, you should check its settings. The temperature of water should be set at a temperature higher than the set temperature. In some cases, you may have to set the spa into standard or economy mode to get the right temperature. The filter should also be clean.

If the problem persists, try to troubleshoot the issue in the spa’s control panel. It may be related to the temperature probe or the hot tub control. A temperature probe error could also cause the HL error message. If you find the problem is caused by the circ pump, you should turn off the jets button and reset the spa. Then, repeat the process until the problem is resolved.

Onzen(tm) Salt Water system

There are some advantages to adding the Onzen(tm) Salt Water system to your old Arctic spa. The Onzen Salt Water system is gentler on your skin and produces its own sanitizer through electrolysis using Dead Sea salts. This system is an excellent alternative to chlorine and does not cause any adverse side effects. The Onzen Spa Boy automates the process, testing the water in real time and making adjustments automatically.

The RIM System has a maintenance-free cabinet and RTB Insulation Panels that are certified to CEC energy efficiency standards. In addition, this system features digital LED lighting, a patented ozone system, and an iWatch perimeter lighting system. Some of the Jacuzzi models also feature a stacked stone deck and polyurethane dual-cell insulation.

Replacement heaters

You can find replacement heaters for older Arctic spa models by visiting the Arctic Spas online store. The heaters are available for most models and are very easy to install.

You can also purchase parts from the online store if you are unsure which heaters you need. However, keep in mind that some parts aren’t covered under the warranty. To avoid being out of luck, you should consider buying from an authorized Arctic Spas dealer.

There are a wide range of Arctic Spas dealers throughout the U.S. The dealers often receive an A+ rating from the Better Business Bureau and accredited status from the Better Business Bureau.

The brand is one of the fastest-growing companies in Canada and is also the official hot tub for the NHL. Its products are also sold worldwide and have several safety and quality certifications.

Aside from quality products, Arctic Spas participates in several green initiatives. For instance, they are partners with PEFC, a non-profit organization that works to ensure that forests are responsibly managed.

If you notice that the water temperature in your hot tub is inconsistent or not reaching the temperature you had set, there may be a problem with your spa’s heating system.

If it’s not heating, you should check the pump, which should be turned on and off for at least 5 seconds.

If that doesn’t work, you may have a problem with your pressure switch. If you suspect that this problem is the result of the heater, call your hot tub supplier or a hot tub technician.

The heaters in an old Arctic spa can become defective over time. Thankfully, there are a number of products on the market that can be used to replace them.

You can find 5.5kw 230-volt heaters, a 90-degree curve heater, and a 6kw hairpin 110-220v heating element. As a part of the replacement heater assembly, you can also purchase new tailpieces and flat gasket o-rings.

Cost of arctic spas

If you are in the market for a new hot tub, you might want to consider an older model by Arctic Spas. These spas are more affordable and are built with innovative designs.

Their owners come from small communities in Canada and put an emphasis on low maintenance, which will ultimately save you money over time. Most of their hot tubs are cheaper to operate than most major brands.

The cost of an older model depends on the model and what you want it to do for you.

The Tundra is one of the most popular tubs from Arctic Spas. Its design combines space and comfort. This spa has four shuttle seats and three multi-level seats. Its footwall is huge. The smaller version of the Tundra is the Kodiak. It offers a quality lounger seat and seven-foot footwells.

The larger Yukon is also available. It features two lounger seats for hydrotherapy.

The Coyote Spas and other models of the Arctic brand fall into the low-cost category. The base models of the company have fewer options.

These options can be retrofitted on-site, and the overall cost of this is not always more expensive than buying a factory-installed model. However, if you are in the market for an older model of an Arctic spa, it may make more sense to get an older model.

While the Arctic Spas brands are known for their quality products, they are also known for being affordable. You can also find the lower-cost Bear Essentials and Coyote Spas in the Otero series.

These models offer 6-person seating and up to 66 jets.

In addition to these models, you can also find Arctic Spa replacement parts at Hot Tub Outpost. So, you can enjoy the warmth of an Arctic Spa at a lower price.

Summary

The cost of an Arctic Spas model will vary depending on the size and features you choose.

The cheapest Arctic Spa model will run you around $4,000, while the highest priced one will cost around $12,000 or more.

If you plan to install the spa yourself, be sure to follow manufacturer’s instructions. This will not only void the warranty, but it could also result in fire hazards and plumbing leaks.

The true cost of running a hot tub will vary by model, but it will never be more than $20 to thirty dollars per month. In addition, the average maintenance of an Arctic Spa is less than half that of an inground unit.